Resystant – Resina polimerica Green a stato finale solido

Green two-component polymer resin. An isocyanate-free, non-toxic, non-hazardous electrical insulating filler.

GREEN
RESIN

RESIN

NON-TOXIC AND HIGH MECHANICAL STRENGTH?

IT'S POSSIBLE!

The pouch with an integrated vertical heat seal allows for quick and easy mixing of the two components without the need for additional accessories, reducing the amount of waste to be disposed of at the end of the installation.

Resystant's excellent mechanical and electrical properties ensure protection and insulation against water, dust, and the elements for low-voltage electrical connections.

The innovative isocyanate-free formulation provides complete protection against accidental contact with live parts of the connection.

Its high mechanical strength and excellent adhesion to cables make Resystant particularly well-suited for use in low-voltage joints with cast resin insulation, ensuring reliable and long-lasting protection. 

Resystant is completely free of isocyanates and ensures the highest levels of safety for the environment and operators.
It is classified as non-hazardous
in accordance with EU Regulation No. 1272/2008 (CLP). 

There is no requirement to wear gloves or personal protective equipment.

Press Part A against Part B until the central weld gives way

Complete the opening by spreading the sides of the seal on both sides of the envelope

Thoroughly mix components A and B inside the packet for at least 3 minutes

Cut open the packet and pour out the contents within 5 minutes after mixing is complete

RESYSTANT

Two-component resin that cures to a solid state, packaged ina single pouch

RESYSTANT JOINT


-cast green polymer resin couplings in their final solid state

Notes on Certification

“B Corporation Certification” is a trademark licensed by B Lab, a private nonprofit organization, to companies that, like ours, have successfully passed the B Impact Assessment (“BIA”) and therefore meet B Lab’s requirements in terms of social and environmental performance, accountability, and transparency. It should be noted that B Lab is not a conformity assessment body within the meaning of Regulation (EU) No. 765/2008 or a national, European, or international standardization body within the meaning of Regulation (EU) No. 1025/2012. The BIA criteria are distinct and independent from the harmonized standards established by ISO or other standardization bodies and are not endorsed by national or European public institutions.